My Cart
Your cart is empty
Congrats!
You've qualified for free shipping!
Nearly there!
Ionmax+ ED18 Industrial Grade Desiccant Dehumidifier
$2,900.00
RRP
In stock
Addons:
- Maintains dryness of multiple rooms through ducting designed to operate 24/7
- Industrial grade desiccant dehumidifier that is perfect for home or office use
- Can double as a centralised air purifier through optional deodorising HEPA filters
- Works in any orientation - on walls, floors, or even upside down on the ceiling
- Removes up to 19L of moisture a day
- Remote monitoring and setting via mobile app
- Suitable for rooms up to 80m2
Ionmax+ ED18 Industrial Grade Desiccant Dehumidifier
A Desiccant dehumidifier that has your entire building covered
The Ionmax+ ED18 Industrial Grade Desiccant Dehumidifier efficiently maintains the dryness of multiple rooms through ducting designed to operate 24/7. Compatible with optional HEPA filters and easily controlled via mobile app.
No heavy moisture is too much to handle with the Ionmax+ ED18 Desiccant Dehumidifier. This unit can be used as a centralised dehumidifier throughout the building and removes up to 19L of moisture a day. No humidistat installation is needed as settings can be adjusted via the mobile app.
Continuous 24/7 operation
No emptying of tanks is required. Built to run continuously to dehumidify all day, all year round.
Remote monitoring & setting via app
Adjust settings remotely via the mobile app. No humidistat control installation is needed.
Doubles as a HEPA Air Purifier
Come with a washable antibacterial pre-filter by default. Optional HEPA or deodorising HEPA filter available.
Customisable installation
Can be used as it is or mounted using suitable screws. Ducts and screws can be sourced from local DIY stores.
Ionmax+ ED18 Dehumidifier Features
Remove up to 19L of moisture a day
Compatible with HEPA filter
Remote controlled via mobile app
Continuous 24/7 operation
Works even at -20°C temperature
Customisable installation
How It Works
The air to be processed is suctioned via a filter into the cabinet by a centrifugal fan. The pressured air mainly passes a desiccant rotor to leave moisture on it and becomes dry air flowing out through the main outlet.
A motor slowly drives the rotor to pass through a heater-collector portion where the moisture on the rotor will be evaporated out to the wet air outlet, and the rotor is regenerated for later moisture absorption.
The wet air is a small part of the pressured air that passes the heater to be heated up and then passes the rotor to bring moisture out. Works 4-6 times better than 25L conventional dehumidifiers at temperatures below 25°C.
Compatible with the Ionmax App
The IONMAX app is a smart device management App for you to control and manage your intelligent home products easier and to live smarter. Download the app through Google Play or App Store.
No humidistat installation is needed. Adjust the dehumidifier settings through a mobile app. Below are the information and settings you could see on the app:
- Ambient Temperature display
- Ambient humidity display
- Fan speed selection
- Run schedule
- Humidity setting
- Auto-off timer
Make sure your phone is connected to your 2.4G Wi-Fi network and the dehumidifier should be close to your router to get a strong Wi-Fi signal. There are two methods of pairing - EZ and AP mode. Please read the user manual for pairing instructions.
Compatible with optional HEPA Filters
The Ionmax+ ED18 Dehumidifier comes with a washable antibacterial pre-filter by default but you could also purchase the optional and compatible HEPA or Deodorising HEPA ED18 filters.
Replace your HEPA/deodorising HEPA filter once every 6 months for optimal air treatment performance.
Ionmax+ ED18 HEPA Replacement Filter
Replace your HEPA filter once every 6 months for optimal air treatment performance.
Ionmax+ ED18 Deodorising HEPA Replacement Filter
Replace your Deodorising HEPA filter once every 6 months for optimal air treatment performance.
Ionmax+ ED18 Dehumidifier Specifications
| Model | Ionmax+ ED18 |
| Flanges | Input and Output |
| Room Size | Up to 80m2 |
| Daily Dehumidification Rate | 19L/day 17L/day with HEPA filter |
| Humidity Setting | 30 to 70%RH (in increments of 5%RH) or continuous mode |
| Power Consumption | 850W |
| Power Cord Length | 2 meters |
| Duct Sizes | Humid air: Ø73 x L48mm (Max 3m length) Dried air: Ø115 x L56mm (Max 5m length) Input air: Ø115 x L56mm (Max 5m length) |
| Operating Temperature | -15°C - 40°C |
| Controls | Tach-switch keys and LCD Remote control & Wi-Fi pairing with mobile app |
| Dimensions | 31.2 x 46.3 x 31.8 cm |
| Weight | 13 kg |
| Warranty | 2 Years |
Cleaning and Maintenance
The dehumidifier is designed for continuous use over a long period with minimal supervision. Under normal operating conditions, maintenance requirements are minimal. The service depends mainly on the operational conditions and working environment.
Cleaning
1. Disconnect from the power supply before cleaning or servicing the unit or any of its components.
2. Wipe thoroughly clean with a moist cloth (a soft, damp cloth) and a mild household detergent. DO NOT clean any parts of the dehumidifier by spraying it or immersing it in water. DO NOT use any chemicals, petrol, aggressive detergents or other cleansing solutions when cleaning the dehumidifier.
Product Comparison
| Model | DryFan DF8 | DryFan DF12 | DryBoat DB8 | DryBoat DB12 | ED18 Dessicant |
| Flanges | Input | Input and Output (best suited for inline ducted air conditioning systems) |
Input | Input and Output | Input and Output |
| Extraction Rate | 8 litres/day | 12 litres/day | 8 litres/day | 12 litres/day | 19 litres/day |
| Power Consumption | 350W, 220V, 50Hz | 500W, 200V, 50Hz | 350W, 220V, 50Hz | 500W, 200V, 50Hz | 850W, 220-240V, 50Hz |
| Material | Mild Steel Epoxy Paint | Stainless Steel | Electro-Galvanized steel | ||
| Plug | 10A | 10A | - | ||
| Humidistat Option | Yes | Yes | No | ||
| Power Cord Length | 3m | 3m | - | ||
| Noise Level | 49dB | 52dB | 49dB | 52dB | 56 +3 dB |
| Duct Sizes | 40mm - 125mm | 40mm - 125mm | 56mm - 115mm | ||
| Operating Temperature | -20℃ ~ 40℃ | -20℃ ~ 40℃ | -15℃ ~ 40℃ | ||
| Power Out Restart | Yes | Yes | - | ||
| Work from DC-AC Converter | Yes | Yes | - | ||
| Water Tank | Yes 3.5 Litre | No | No | No | No |
| Airflow(m3/hr) | 90 process/14 exhaust | 124 process/20 exhaust | 90 process/14 exhaust | 124 process/20 exhaust | - |
| Dimensions | 19 x 19 x 19 cm | 28 x 19 x 19 cm | 19 x 19 x 19 cm | 28 x 19 x 19 cm | 31.2 x 46.3 x 31.8 cm |
| Weight | 4.8 kg | 6.4 kg | 4.8 kg | 6.4 kg | 13 kg |
| Coverage Area | 74 m2 | 111 m2 | 74 m2 | 111 m2 | 80 m2 |
| View | View | View | View | You are viewing this product | |
About Ionmax
Ionmax's quality products are designed to promote a healthy and comfortable lifestyle. Whether you're awake or asleep, Ionmax is working to make sure you breathe the best air possible. Ionmax provides solutions for your surroundings, keeping you energized for life.
Manufacturer's Specifications
| Type | Desiccant |
|---|---|
| Power Consumption | 850W, 220V, 50Hz |
| Tank Capacity | N/A |
| Control | Tach-switch keys and LCD Remote control & Wi-Fi pairing with mobile app |
| Noise | N/A |
| Moisture Removal | 19L/day or 17L/day with HEPA filter |
| Coverage | Multiple Rooms |
| Weight | 13 kg |
| Manufacturer's Warranty | 2 Years Warranty |
| Manufacturer | Ionmax |
Product Manuals
How to Order - More Information
Sleep Solutions is registered as a provider with the NDIS (National Disability Insurance Scheme)
Customer Reviews
Share your thoughts with other customers
Write Your Own Review for Ionmax+ ED18 Industrial Grade Desiccant Dehumidifier
ION ED18